Prytec Logo Header
Go to content

Tekcel ENDURO Signmaking CNC Router

Great signs start with a Tekcel CNC Router

Built to handle just about any sheet of material and every application you can imagine. Our ENDURO Signmaking machine with OptiCUT oscillating knife system utilises a tangential carbide blade. Allowing it to process a wider range of materials such as: X board, graphic foam boards, EPS, plastic-covered foam, insulation, corrugated cardboard and plastic, gasket materials, rubber, cork, carpet, felt, cloth or fabric, vinyl and corflute. The OptiCUT knife and creasing wheel are both steerable units. With the oscillating system switched off, you are able to use the knife as a steerable drag knife for cutting materials like vinals and banner material.

OptiCAM and OptiCUT Solutions

The OptiCAM system uses a digital camera fitted to the tekcel router to automatically locate registration marks on printed material. This permits the Router to cut shapes from the material in perfect registration. By viewing the registration marks which are printed beside the image, it is able to automatically adjust the start point, baseline angle and scaling of the cutting instructions. This also accomodates any misalignment of the printing on the material, misalignment of the material on the machine and differences in scaling between the printer and the router.

Available Processing Area Sizes

  • 2500mm x 1540mm
  • 3100mm x 2058mm
  • 4100mm x 2058mm

Standard Components
  • 240mm Z Stroke
  • 140mm Gantry Clearance
  • 750W Brushless AC Servo Motors and Drives (all 4 Axes)
  • Ballscrew Drive (all 4 Axes)
  • Dual Drive Gantry (x axis)
  • Tool Length Sensor
  • 9Kw HSD Spindle (Auto Tool Change)
  • Vacuum Dustfoot
  • ISO30 Tool Holder and ER32 Collets
  • Pedestal Controller with Optional Touch Screen
  • Pop-Up Tool Rack with 12 or 17 Tool Capacity
  • Tommotek GenIII Controller with Graphical User Interface
  • Sheet Registration Pop-Up Pins
  • Vaccuum Hold Down Table Top with 1 or 2 7.5Kw Pumps

  • OptiCAM (Registration Camera)
  • OptiCUT (Reciprocating Knife)
  • Coolant Atomizer
  • Dust Extractor
  • ProfileLAB 2D
Tekcel ENDURO Sign CNC
Click images to enlarge

CNC Routers

Video Gallery

Prytec Logo Footer
Back to content