210 to 1,625 mm / 210 to 1,371 mm
"Maximum 1.0 mm (39 mil) with liner, for printing/Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting"
Roll outer diameter
Maximum 210 mm
Max. 40 kg / Max. 30 kg
76.2 mm or 50.8 mm
Max. 1,600 mm (63 in.) / Max. 1,346 mm (53 in.)
Types TrueVIS INK 500 cc pouch
Colours Four colours (cyan, magenta, yellow, and black) or,
Seven colours (cyan, magenta, yellow, black, light cyan, light magenta, and light black)
(dots per inch) Maximum 900 dpi
10 to 300 mm/s
(*3) 30 to 500 gf
Roland CAMM-1 series blade
0.000 to 1.500 mm (0.0 to 59.1 mil)
(when cutting) 0.025 mm/step (0.98 mil/step)
Distance accuracy (when printing)
(*4)(*5) Error of less than ±0.3 % of distance traveled or ±0.3 mm (±11.8 mil), whichever is greater
Distance accuracy (when cutting)
(*4) Error of less than ±0.4 % of distance traveled or ±0.3 mm (±11.8 mil), whichever is greater
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2 % of distance traveled or ±0.1 mm (±3.9 mil), whichever is greater
Repeatability (when cutting)
(*4)(*6) ±0.1 mm (±3.9 mil) or less
Alignment accuracy for printing and cutting
(*4)(*7) ±0.5 mm (±19.7 mil) or less
Alignment accuracy for printing and cutting when reloading media
(*4)(*8) Error of less than ±0.5 % of distance traveled by media or ±3 mm, whichever is greater
Media heating system
(*9) Print heater set temperature: 30 to 45°C
Dryer set temperature: 30 to 50°C
Ethernet (100BASE-TX/1000BASE-T, automatic switching)
Automatic sleep feature
AC 100 to 120 V ±10%, 9.8A, 50/60 Hz or AC 220 to 240 V ±10%, 5.2 A, 50/60 Hz AC 100 to 120 V ±10%, 7.9 A, 50/60 Hz or AC 220 to 240 V ±10%, 4.1 A, 50/60 Hz
During operation Approx. 1.270 W / Approx. 1.030 W
Sleep mode Four colours: 75 W / Four colours: 49 W or,Seven colours: 40 W / Seven colours: 43 W
Acoustic noise level
During operation 63 dB (A) or less
During standby 53 dB (A) or less
(with stand) 2,945(W) x 745(D) x 1,310 (H) mm / 2,685(W) x 745(D) x 1,310 (H) mm
(with stand) 205 kg / 191 kg
Power on (*10) Temperature: 20 to 32°C, humidity: 35 to 80 % RH (no condensation)
Power off Temperature: 5 to 40°C, humidity: 20 to 80 % RH (no condensation)
Dedicated stands, power cord, media clamps, media holders, replacement blade for separating knife, User's Manual, etc.
*1 - The media holders of this machine are designed to be used exclusively with media that has a paper tube (core) with an inner diameter of 3 inches. To use 2-inch media, the optional media flanges are required.
*2 - The length of printing or cutting is subject to the limitations of the program.
*3 - 500 gf is the maximum instantaneous blade force. The blade force must be adjusted according to details such as the media thickness.
*4 - Media type: Media specified by Roland DG Corp. Temperature: 25°C, humidity: 50%. Roll media must be loaded correctly. Applicable when all pinch rollers that can be used with the media width are used. Side margins: 25 mm or more for both the left and right margins. Front margin: 35 mm or more. Excluding expansion/contraction of the media. Not guaranteed when the print heater or dryer is used. Assumes all correction and adjustment functions of the machine have been used properly.
*5 - Print travel: 1 m.
*6 - [PREFEED] menu item must be set to "ENABLE." Range for assured repetition accuracy; For media with a width exceeding 610 mm: Length 4,000 m; For media with a width of 610 mm or less: Length 8,000 mm
*7 - Provided that the media feed length is 3,000 mm or less; Excludes the effects of slanted movement and of expansion and contraction of the media.
*8 - Data size:1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction; No lamination; Automatic detection of crop marks at 4 points when media is reloaded; During cutting, [PREFEED] menu item must be set to "ENABLE.”; Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*9 - Warm-up is required after the power is turned on. This may require 5 to 20 minutes, depending on the operating environment; Depending on the ambient temperature and the media width, the set temperature may not be reached.
*10 - Operating environment.